Indoff-Wisconsin, Serving Wisconsin and Northern Illinois
 
 
 
 
 
 

 

      

Free Standing Workstation Bridge Crane-Ceiling Mounted Workstation Bridge Crane

SPANCO Free Standing Workstation Bridge Cranes are available in capacities ranging from 250lbs. to 4000lbs. and overall bridge lengths up to 34ft.

All standard SPANCO cranes have been certified for use in general Seismic Zone 4 locations per the Uniform Building Code.

SPANCO stand alone workstation bridge cranes provide ideal, cost effective material handling solutions…

  • If you rent your building: Stand alone systems do not become a permanent part of a structure once installed, allowing for relocation.
  • Your structural building support is inadequate for an overhead ceiling mounted crane: The only mounting requirement is a standard concrete building floor (in most cases).
  • A specific area needs coverage, however you don’t want to tie up your existing overhead crane.
  • The operator will experience the force of approximately 10 lb. to begin moving a load of 1000 lb. and 8 lb. to continue moving the load (100 to 1 ratio).

SPANCO Ceiling Mounted Workstation Bridge Cranes are available in capacities ranging from 250 lbs to 4000 lbs.

SPANCO ceiling mounted workstation bridge cranes provide ideal, cost effective material handling solutions…

  • If work floor space is limited; Ceiling mounted systems provide infinite coverage without interfering support columns.
  • Systems  can be linked to a monorail or another bridge crane using crane interlock sections.

 

NOTE: Ceiling mounted systems are supported by the building structure. A qualified architect or engineer should be consulted to determine the adequacy of the building structure intended to support the crane system.

Free Standing Workstation Jib Crane Food Processing Line with Jib Crane

    Free Standing Jib Crane with Vacuum Lifter Attachment

SPANCO Free Standing Jib Cranes come with a hoist trolley and only require a 6" reinforced concrete floor for many applications. Optional portable bases are available to make your Workstation Jib Crane portable.

Freestanding Workstation Jib Cranes

  • Capacities from 100 to 1,000 lbs.
  • Standard spans up to 16 ft.
  • Standard under boom heights to 12 ft.
  • 360° rotation.
  • Utilize a square or hexagonal base plate mounting secured by anchor bolts.

Wall Cantilever Workstation Jib Cranes

  • Capacities from 100 to 1,000 lbs.
  • Standard spans to 16 ft.
  • 200° rotation.
  • Wall or column mounted (requires structurally adequate wall or column support).
  • Bronze bearings at the pivot points ensure easy rotation.
Indoff, Inc. • Milwaukee, Wisconsin • Phone 414.529.4067 • Fax 414.529.4178
Indoff.com